61 35 095 Removing and installing/replacing control unit/module for seat heating
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)!
NOTE:
Move seat completely towards rear/top.
Disconnect plug connection (1).
Open lock (2) in direction of arrow and remove control unit/module for seat heating (3) towards bottom.
Installation:
Make sure control unit/module for seat heating (3) is correctly engaged.