52 26... Removing and installing/replacing cup holder in armrest for rear seat backrest (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Open armrest.

Open cup holder.

Release screws (1) on left and right.

Remove complete cup holder towards front.

Fig 1: Identifying Cup Holder Screw

Courtesy of BMW OF NORTH AMERICA, INC.