52 26 070 Removing and installing/replacing filler element (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Reach between filler element (1) and backrest.

Unclip filler element (1) towards front and lift out.

Fig 1: Identifying Filler Element And Backrest

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert filler element behind guide of rear seat.

Press down filler element firmly.

Metal eyelet must snap noticeably and audibly into place on retaining clip (1).

Fig 2: Identifying Retaining Clip And Filler Element

Courtesy of BMW OF NORTH AMERICA, INC.