52 14... Replacing seatback release (LVK module) for left or right front seat (convertible)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM COVER

Detach backrest cover from metal retainer.

Lever out welt in marked area.

Fig 1: Identifying Backrest Cover

G06180794

Courtesy of BMW OF NORTH AMERICA, INC.

Disengaging Bowden cable from seatback release:

Lever out cable counter-support (2).

Unhook Bowden cable nipple (1).

Fig 2: Identifying Cable Counter-Support And Bowden Cable Nipple

G06180795

Courtesy of BMW OF NORTH AMERICA, INC.

Mark position of seatback release.

Fig 3: Marking Position Of Seatback Release

G06180796

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 4: Identifying Screws

G06180797

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip wiring harness (2).

Remove backrest release (1) from backrest frame downwards in direction of arrow.

Fig 5: Identifying Wiring Harness And Backrest Release

G06180798

Courtesy of BMW OF NORTH AMERICA, INC.