51 61... Removing and installing/replacing protecting skid/mounting bracket (convertible): Notes
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle.
Driving without the protective skid/mounting bracket is not permitted!
Driving without the protective skid/mounting bracket is not permitted!
Necessary preliminary tasks:
Release screws (1).
Tightening torque: see Fig 1
Release screw (3).
Tightening torque: see Fig 1
Release screws (2) and remove protective skid (4).
Tightening torque: 50 Nm
Installation:
Replace all screws.
Middle lug of protective skid must be situated between mounting bracket and left diagonal strut.