51 71... Removing and installing/replacing multifunction pan

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Left and Right luggage compartment wheel arch trims

Release screws (1).

Remove guide (2).

Fig 1: Multifunction Pan Guide And Screws

G04726868

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Screw

G04726869

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Multifunction Pan Cover And Screws

G04726870

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

For tightening torque refer to 51 71 9AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Multifunction Pan Mounting Nuts

G04726871

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Seals And Multifunction Pan

G04726872

Courtesy of BMW OF NORTH AMERICA, INC.