Starting removal
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Spool can only be turned in one direction.
- Make sure the wire is always situated in the guide channel of the suction cup lifter (1)
- Fit reversible ratchet on spool (2) and tension wire
- Start by cutting lower adhesive bead
- Both wires meet ahead of both spools when removal is completed
- Remove "Roll Out 2000"
- Remove disc