41 11 734 Rear Tension Strut Mounting Complete Replacement

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Following new body parts are required:

(1) Bracket, tension strut, rear

Fig 1: Identifying Bracket, Tension Strut, Rear
Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in areas (1).

Open weld joints in areas (2) on both sides of rear axle carrier (3).

Installation information:

To adjust new part to fit, screw down tension strut.

If vehicle is on straightening bench, adjust new part to fit with straightening attachment or universal mount.

Fig 2: Identifying Weld Joint Areas And Rear Axle Carrier

Courtesy of BMW OF NORTH AMERICA, INC.