LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 645 (Fuel System - Tightening Torques) >> Senders for Control Unit >> 13 62 Senders for Control Unit

13 62 Senders for Control Unit

WARNING: This page is about a different car, the 2006 BMW 330xi, 2006 BMW 330i, 2006 BMW 325xi, 2006 BMW 325i, and 2006 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
SENDERS FOR CONTROL UNIT TIGHTENING SPECIFICATION

  Type Measure
1AZ Temperature time switch M21 / M51 18 Nm
2AZ Coolant temperature sensor M60/1 / M60/2 / M21 / M51 18 Nm
  All others 13 Nm
3AZ Temperature switch All 28 Nm
4AZ Temperature sensor - air All 13 Nm
5AZ Charge-air pressure sensor on holder M51 / M41 4 Nm
Charge-air pressure sensor on intake manifold M47 5 Nm
6AZ Twin temperature sensor (4-pin plug-in connection) M41 / M43 / M44 / S50 / S52 / M52 / M57 / M67 / M62 / M73 13 Nm
7AZ Air-mass sensor on lower section of air filter housing M51 3.5 Nm
Air-mass flow sensor to cylinder head cover M47 / M47TU / M57 / M57TU 4.5 Nm
8AZ Pulse generator, camshaft to cylinder head cover M57 4.5 Nm
  M47TU / M57TU 3.5 Nm
9AZ Intake neck on air-mass flow sensor M47 9 Nm