31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 335i, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 335i, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1) and remove bracket for brake hose.
Release nut (3) and remove stabilizer link (2).
Installation:
Replace self-locking nuts.
For tightening torque refer to 31 35 2AZ in 35 STABILIZER BAR .