61 35 115 Removing and installing/replacing footwell module

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection) .

Necessary preliminary tasks:

Remove Footwell Side Trim Panel on A-pillar, left

Unlock plug connections (1) and disconnect.

Release plastic nuts (2) and remove footwell module (3).

Fig 1: Identifying Plug Connections, Plastic Nuts And Footwell Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out Programming/Coding.