72 14... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page is about a different car, the 2006 BMW 330xi, 2006 BMW 330i, 2006 BMW 325xi, 2006 BMW 325i, and 2006 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque 52 24 03AZ. See SEATS - TIGHTENING TORQUES

Fig 1: Identifying Lever Out Cover And Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.
It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Tether Eyelets And Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.