Installing A New Instrument Cluster

WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

The manipulation dot is displayed when terminal 15 is activated because the instrument cluster has not yet been encoded with the vehicle identification number.
Encode the instrument cluster (input the vehicle identification number in the instrument cluster and assign it to the vehicle).
Switch terminal 15 off and on. After terminal 15 has been switched back on: The current kilometer reading and the CBS data are transmitted to the instrument cluster by the CAS control unit. The manipulation dot disappears.