54 37... Gauging coupling fastener (after removing and installing roof module): Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 251
- 00 9 450
- 54 0 130
- 54 0 131
- 54 0 132
- 54 0 180
IMPORTANT:
To prevent damaging the coupling fastener gauge, set the gauge down only in the transportation crate or on the cross beam.
The coupling fastener gauge is a highly sensitive measuring instrument which reacts even to light impacts with distortion.
The coupling fastener gauge must be checked for dimensional accuracy on a master gauge after being subjected to impact or dropped.
The coupling fastener gauge is a highly sensitive measuring instrument which reacts even to light impacts with distortion.
The coupling fastener gauge must be checked for dimensional accuracy on a master gauge after being subjected to impact or dropped.
NOTE:
The coupling fastener must be gauged after each removal and installation of the roof module .
Necessary preliminary tasks:
- roof module must be installed
- Align basic gauge
IMPORTANT:
Tape off corners of roof shell 1 and 3. Risk of damage when positioning gauge for coupling fastener and assembly.