67 11 555 Removing and installing/replacing servodrive for tank filler flap: Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Disengage emergency actuation pull strap (2) from retainer (5) and remove towards front.

If necessary, unclip locking pin (3) in direction of arrow on servodrive (4).

Fig 1: Unclipping Locking Pin From Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.