51 71... Removing and installing/replacing left/right reinforcement cover (AWD)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Release bolt (1) on front assembly underside protection.
Release screws (3) and nuts (3).
Remove reinforcement cover (4).
Tightening torque: 2.5-3 Nm.
Installation:
Make sure reinforcement cover (4) is correctly seated.