LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1512 (Body Equipment - Repair - E91) >> Front And Rear Window >> 51 31... Remove windscreen with "Roll Out 2000" >> Notes

51 31... Remove windscreen with "Roll Out 2000": Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Windscreen removal system "Roll Out 2000" 

Fig 1: Windscreen Removal System - Roll Out 2000
G06978842Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Both paint and ergonomic and health-endangering damage is minimized with the "Roll Out 2000" system.
WARNING: Follow safety instructions  See 5100... SAFETY INSTRUCTIONS FOR WORKING ON CARS WITH AIRBAG SYSTEMS  or 72 SAFETY PRECAUTIONS AND GENERAL INFORMATION for working on vehicles with airbag systems (risk of injury).
IMPORTANT: Take care when handling sharp-edged tools and cutting wire (risk of damage to head airbag and window glass).
IMPORTANT: Always keep both suction cups dry and clean to ensure their optimum adhesion on the windscreen.
Lubricate spool if lock rattling becomes too loud.
Always wear safety goggles and protective gloves for your own safety.

Mounting suction cub lifters on windscreen or rear window: 

Fig 2: Identifying Suction Cup Lifters Position On Windscreen (1 Of 2)
G06978843Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Identifying Suction Cup Lifters Position On Windscreen (2 Of 2)
G06176801Courtesy of BMW OF NORTH AMERICA, INC.