86 21... Removing rotary striker lock: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Use new spring nut.

Fig 1: Identifying Spring Nut And Pull Rod

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook pull rod (1) from rocker (2).

Fig 2: Identifying Pull Rod And Rocker

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove rotary striker lock (2) from opening (3).

Tightening Torque, 86 21 12AZ.

Use new Stover nuts.

Fig 1: Identifying Rotary Striker Lock With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Detach spring nut (1) from pull rod (2). Remove pull rod (2) from rotary striker lock (3).

Use new spring nut.

Fig 1: Identifying Rotary Striker Lock, Pull Rod And Spring Nut

Courtesy of BMW OF NORTH AMERICA, INC.