86 21... Removing lock striker fixture on rear lid: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Grip rubber seal on seal piping (1) and pull off in area of lock striker fixture (2). Grip lid seal (3) on seal piping (4) and pull off in area of lock striker fixture (2).

Fig 1: Identifying Rubber Seals, Lid Seals And Lock Striker Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1+2) and remove lock striker fixture (3).