86 10... Disassembly of left and right lamp housings: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Lamp Housing Sealing Compound And Rivets Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivet connections (1).

Raise side sections (2, 3).

Pull out lamp housing (4) towards inside in direction of platform.

Fig 2: Identifying Lamp Housing And Rivets Connections

Courtesy of BMW OF NORTH AMERICA, INC.