LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1503 (General Electrical System - Repair - E91) >> Plug Connection, Terminal, Fuse Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Socket housing (radio plug), Hybrid System MQS/MPQ >> Removing MPQ contacts from contact carrier

Removing MPQ contacts from contact carrier

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove contact carrier (1) with MQS contacts from the radio plug.

Raise lock (2) on radio plug.

Remove contact carrier (3) from radio plug.

Fig 1: Removing Contact Carrier With MQS Contacts From Radio Plug
G04727550Courtesy of BMW OF NORTH AMERICA, INC.

Press lock (1) in direction of arrow.

Pull secondary lock (2) in the direction of the arrow and out of contact carrier (3) completely.

Fig 2: Pulling Secondary Lock In Direction Of Arrow
G04727551Courtesy of BMW OF NORTH AMERICA, INC.

Press special tool 61 1 135 against inside of contact in contact carrier (2).

Remove wire with female contact (1) from contact carrier (2).

Fig 3: Pressing Special Tool 61 1 135 Inside Of Contact In Contact Carrier
G04727552Courtesy of BMW OF NORTH AMERICA, INC.