LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1503 (General Electrical System - Repair - E91) >> Plug Connection, Terminal, Fuse Box >> 61 13... Crimping stop parts >> 4. Checking crimping

4. Checking crimping

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Check insulation crimp (8) and wire crimp (9) against following illustrations to ensure crimps are correctly located.

NOTE: Illustration shows butt connectors and contact sleeves for fan connectors knocked on one side. The crimping procedure is identical here.
Fig 1: Identifying Insulation Crimp And Wire Crimp
G04727474Courtesy of BMW OF NORTH AMERICA, INC.

Correct crimping: 

Visible conductor end (10).

Visible insulation end (11).

Fig 2: Identifying Conductor And Insulator Ends
G04727475Courtesy of BMW OF NORTH AMERICA, INC.

Incorrect crimping: 

Conductor end (10) inserted too far.

Insulation end (11) in wire crimp.

If necessary, repeat crimping with a new contact.

Fig 3: Precaution For Conductor End And Insulation End
G04727476Courtesy of BMW OF NORTH AMERICA, INC.

Incorrect crimping: 

Conductor end (10) not visible.

Insulation end (11) not visible.

If necessary, repeat crimping with a new contact.

Fig 4: Precaution For Conductor End And Insulation End
G04727477Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals