LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1503 (General Electrical System - Repair - E91) >> Control Units, Modules >> 61 35 975 Removing and installing/replacing bumper antenna for Comfort Access System >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (2).

Unlock catches (1) and remove bumper antenna for comfort access system (3) in direction of arrow from holder.

Installation: 

Make sure bumper aerial/antenna for comfort access system (3) is correctly seated in holder.

Fig 1: Removing Bumper Antenna For Comfort Access System From Holder
G04727650Courtesy of BMW OF NORTH AMERICA, INC.