LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1503 (General Electrical System - Repair - E91) >> Control Units, Modules >> 61 35 954 Removing and installing/replacing interior antenna for comfort access system (rear)

61 35 954 Removing and installing/replacing interior antenna for comfort access system (rear)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Carefully unclip catches (2) on trim (1) (risk of damage).

Move with special tool 00 9 323 from below behind trim (1) and release catches (2).

Release trim (1) towards rear from catches (3).

If necessary, disconnect plug connections and remove trim (1).

Fig 1: Identifying Catches On Trim
G04727600Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1 and 3) must not be damaged.

Guides (2) must not be damaged

Fig 2: Identifying Catches And Guides
G04727601Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock retaining hook (2) and remove luggage compartment antenna for comfort access system (3).

Fig 3: Identifying Plug Connection And Retaining Hook
G04727648Courtesy of BMW OF NORTH AMERICA, INC.