64 52 A/C compressor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - A/C COMPRESSOR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | 20 Nm | |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | 30±1 Nm | ||
| 3AZ A/C compressor to carrier | M67TU, M54, N62, S85, N54 | M8 | 21 Nm | |
| N45, N46, M47T2, M57TU, M57T2 | M8 | 19 Nm | ||
| N52K | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle |
10 Nm 180±15° |
|
| N52K | M8 x 52 | Replace aluminium screw/bolt Jointing torque Torque angle |
10 Nm 90±15 ° |
|
| N52 | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle |
10 Nm 180±15 ° |
|
| N53 | M8 x 52 | Replace aluminium screw/bolt Jointing torque Torque angle |
10 Nm 90±15 ° |
|
| N53 | M8 x 87 | Replace aluminium screw/bolt Jointing torque Torque angle |
10 Nm 180±15 ° |
|
| E85 S54, E86 S54 | 20 Nm | |||
| 4AZ Belt pulley/hub to A/C compressor | M47T2 | 35±5 Nm | ||
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | 19 Nm | ||
| 6AZ Cable holder to A/C compressor | M47T2 | 3 Nm |