33 32 190 Removing and installing/replacing left or right camber arm: Replacement

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Replace lower spring pad (refer to REMOVING AND INSTALLING/REPLACING COIL SPRING ).

Version with xenon lights:

Release screw (1) and remove bracket (2).

Tightening torque 37 14 4AZ .

Fig 1: Identifying Bracket And Screw

Courtesy of BMW OF NORTH AMERICA, INC.