25 16 Shift Console - Automatic Transmission
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SHIFT CONSOLE - AUTOMATIC TRANSMISSION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ | Bowden cable to shift tower/transmission | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E81/E82/E88 | 15 Nm | |
| 2AZ Clamping screw on shift lever | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 10 Nm | ||
| 3AZ Shift console to tunnel | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 7 Nm | ||
| 4AZ Switch to shift console | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92 | 4.5 Nm | ||
| 5AZ Interlock cable to shift tower | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86 | 7 Nm | ||
| 6AZ Cable retaining tab to transmission | E91/E92 4WD | M8X18 | 19 Nm | |
| 7AZ Oval-head screw for emergency release device | E60, E61 | 1.6 Nm | ||
| 8AZ Screw for adjusting cable on transmission | E60/E61/E81/E82/E83/E84/E87/E88/E90/E91/E92/E93 | With ball head | 13 Nm | |
| 9AZ Vulcanized support angle to transmission | E81/E82/E87/E88/E90/E91/E92/E93/E84 | M6 | 9 Nm |