22 11 Engine mounting
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE MOUNTING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52/E85/E86 | 42 Nm | ||
| E65/E66/E67 | M8-8 | 19 Nm | ||
| E60/E61/E63/E64/E83 | M8-8 | 21 Nm | ||
| E53 | M8 - 10.9 | 30 Nm | ||
| E87/E90/E91/E92/E93/E70/E71/E83/E81/E82/E88/E89/E84 | M8 10.9 | 28 Nm | ||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M10 | 38 Nm | ||
| E92/E90/S65 | M10 | 56 Nm | ||
| 2AZ Engine mount to engine support arm | E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E71/E81/E82/E88/E89/E84 | M10 10.9 | 56 Nm | |
| E65/E66/E67 | M12 10.9 | 100 Nm | ||
| E70/E71/E72/E83/E84/E90/E91/E92/E93 | M12 | 68 Nm | ||
| E85/E86/E52 | 42 Nm | |||
| 3AZ Engine support arm to engine | E60/E61/E63/E64/E65/E66/E67/E70/E71/E72/E81/E82/E83/E84/E87/E88/E89/E90/E91/E92/E93 | M10 8.8 | 38 Nm | |
| N51/N52/N52K/N53 | M12 | Aluminum bolts must be replaced | ||
| 1. Jointing torque | 25 Nm | |||
| 2. Angle of rotation | 105 ° | |||
| E60/E61/E65/E66/E67 | M8 8.8 | 19 Nm | ||
| E85/E83 | M8 8.8 | 21 Nm | ||
| E70/E71 | M10 10.9 | 56 Nm | ||
| E53 (N62/M54) | 38 Nm | |||
| E53 (M57) | 65 Nm | |||
| N54/N55 | M12 | Engine N54/55 only | 66 Nm | |
| N42 | M10 8.8 | 38 Nm | ||
| 4AZ Engine mount to console | E65/E60/E61/E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ Console to front axle support | E65/E60/E61/E63/E64 | M8-8 | 21 Nm | |
| 6AZ Vibration absorber to engine support | E70/E71 | 19 Nm | ||
| 7AZ Reinforcement plate to front axle support | E90/E91/E92 | M8 | 19 Nm | |
| 8AZ Support angle to engine mount or front axle support | E90/E91/E92 | M8 | 19 Nm |