32 10 005 Adjustment for active front steering
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Adjustment of the active front steering must be carried out:
- Before adjustment work on the front axle/steering
- after all mechanical work on the steering system
- after the battery has been disconnected or electrical plug connections on the steering column switch cluster have been disconnected
- after replacement/programming or coding of the following components:
- Steering column switch cluster
- DSC control unit
- Active front steering control unit
- ARS control unit
Connect vehicle to BMW diagnosis system.
Select and carry out initial operation/adjustment for active front steering.