Necessary preliminary tasks

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Move VEHICLE INTO NORMAL POSITION
Version with air spring system:
- Remove ignition key
- If necessary, pull fuse for air supply system control unit
Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data . See REAR AXLE - RIDE HEIGHT E91 or FRONT AXLE - RIDE HEIGHT E91/REAR END ).

Measure RIDE-LEVEL HEIGHT OF VEHICLE