LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1417 (Steering And Wheel Alignment - Repair - E91 (AWD)) >> 3200 Electronic Chassis Alignment >> 32 00 620 Adjusting rear axle >> Adjusting camber

Adjusting camber

WARNING: This page is about a different car, the 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 328xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Replace nut (2) and tighten to 5 Nm.

Turn eccentric bolt (1) to adjust camber to setpoint value.

Tighten nut (2).

Tightening torque 33 32 9AZ .

Fig 1: Adjusting Camber Bolt
G04726345Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals