41 33 040 Replacing Front Left Or Right Side Wall Holder: Notes
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Read general service information under BODY, GENERAL .
Side wall removed.
Transfer the systematic diagram onto the respective holder version.
General information:
Observe REPAIR STAGE 2 !
Following new body parts are required (refer to BMW Electronic Parts Catalogue):
- (1) Holder, side wall, front (variant 1)
- (2) Holder, side wall, front (variant 2)
Following CONSUMABLES are required:
| Material | Quantity |
|---|---|
| Adhesive K5a | 1 |
| Blind rivets N3 | 2 |
| Cleaning agent R1 | 1 |