18 20 Exhaust System Suspension
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST SYSTEM SUSPENSION-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening Specification | |
|---|---|---|---|
| 1AZ Clamp to front pipe holder | N54 | M8 x 49 | 19 Nm |
| 2AZ Bracket, primary cat., to primary cat. | N54 | BM8 | 19 Nm |
| 3AZ Front pipe holder to retaining plate | N54 | M8 x 20 | 19 Nm |
| 4AZ Assembly, exhaust system, to assembly, suspension, rear muffler | N54 | M8 | 19 Nm |
| 5AZ Assembly, retaining plate, to transfer case | N54 | M8 x 35 | 19 Nm |
| 6AZ Preliminary pipe bracket to transmission | N54 | M8 x 16 | 19 Nm |
| 7AZ Assembly, retaining plate to transmission | N54 | BM8 | 21 Nm |
| 8AZ Exhaust system to front pipe bracket | N54 | BM8 | 21 Nm |