11 36 Variable Camshaft Control
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE CAMSHAFT CONTROL-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specifications | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N54 | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N54 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N54 | M6x12 | 10 Nm |