11 13 Oil Sump
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
OIL SUMP-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| Optional extra designation: SA203 = All-wheel drive SA205 = Automatic transmission |
||||
| 1AZ Plug (1 x) Oil drain to oil sump. |
N54 | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ ASA screw (20 x with optional extra SA203) (23 x with optional extra SA205) Oil sump (aluminum) to crankcase lower half. The end faces of the aluminum screw heads are painted blue. |
N54 | M8 x 26 | Replace screw. Thread repairs exclusively with aluminum Heli-coil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ ASA screw (5 x M8 x 112 with optional extra SA203) (2 x M8 x 112 with optional extra SA205) (3 x M8 x 92 with optional extra SA203 or SA205) Oil sump (aluminum) to crankcase lower half. The end faces of the aluminum screw heads are painted blue. |
N54 | M8 | Replace screw. Thread repairs exclusively with aluminum Heli-coil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 180 ° | |||
| 4AZ ASA screw (1 x M8 x 36 with optional extra SA203) Oil sump (aluminum) to crankcase lower half. The end faces of the aluminum screw heads are painted blue. |
N54 | M8 | Replace screw. Thread repairs exclusively with aluminum Heli-coil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||
| 5AZ ASA screw (6 x without optional extra SA203) (7 x with optional extra SA203) Oil deflector to crankcase lower half. The end faces of the aluminum screw heads are painted blue. |
N54 | M6 x 20 | Replace screw. Thread repairs exclusively with aluminum Heli-coil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 90 ° | |||
| 6AZ ASA screw (3 x) Transmission to oil sump. |
N54 | M8 x 50 | 19 Nm | |
| 7AZ Hexagon screw (1 x) Holder, transmission oil cooler line, to oil sump. |
N54 | M6 x 30 | 8 Nm | |
| 8AZ Hexagon nut (3 x) Oil level sensor to oil sump. |
N54 | M6 | 8 Nm | |
| 9AZ Transmission fluid cooler bracket to oil sump | N54 | M8 | 9 Nm |