11 22 Flywheel
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
FLYWHEEL-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft (automatic transmission) | N54 | M12x1.5x25.5 | Replace screws | |
| 1. Jointing torque | 30 Nm | |||
| 2. Final tightening | 125 Nm | |||
| 2AZ DM flywheel to crankshaft (manual transmission) | N54 | M12x1.5x 25.35 |
Replace screw | 120 |