12 31 009 Checking alternator (BSD): Notes
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Correct connections on charged battery
- Correct connections on alternator and starter motor
- Good ground connection between engine and body
- Tensioned ribbed V-belt
- Read out DME/DDE fault memory.
NOTE:
The alternator with BSD interface can communicate with the engine control unit (DME/DDE).
The alternator is not connected to the charge telltale light.
The alternator can identify various faults.
The alternator is not connected to the charge telltale light.
The alternator can identify various faults.
BSD alternator can be recognized by the plug connection on the alternator.
Connect diagnosis tester.
- Function selection
- Complete vehicle
- Drive
- Voltage and current regulation
- Voltage and current generation
- Alternator
- Follow instruction in diagnostic program