11 23 010 Removing and installing/replacing vibration damper (N54)

WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front underbody protection
Remove drive belt

Release screws (1).

Tightening torque 11 23 1AZ , see VIBRATION DAMPER

Remove vibration damper (2).

Fig 1: Identifying Screws And Vibration Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.