11 22 500 Removing and installing/replacing flywheel (N54): Notes
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 4 180
- 11 9 260
See ENGINE - SPECIAL TOOLS (N54, N63) .
Necessary preliminary tasks:
- Remove transmission .
- Remove clutch (except Automatic and DKG.
Enlarge special tool 11 9 260 with slot.
Enlarge slot on special tool 11 9 260 to 8 mm.