62 11 280 Removing and installing (replacing) instrument cluster

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection , see 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) ).

Extend steering wheel completely and lower.

Release screws (1). Tightening torque 62 11 1AZ , see 62 11 INSTRUMENT CLUSTER .

Pull instrument cluster (2) forwards a little.

Disconnect associated plug connection.

Remove instrument cluster (2).

Fig 1: Removing Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding .

Check values for Condition Based Service (CBS , see 61 00 ... DIAGNOSIS FOR CONDITION BASED SERVICE ) and correct if necessary.