51 43 070 Removing and installing/replacing side trim panel, footwell, on A-pillar, left

Special tools required: 

• 00 9 317  , see 00 9 317 TRIM PANEL WEDGE

Necessary preliminary tasks: 

• Remove front entrance cover strip, see front (inside) entrance cover strip  and rear (inside) entrance cover strip .
• Remove trim panel for pedal assembly, see Removing and installing/replacing panel for pedals .

Detach mucket (1) in area of footwell trim.

Release screw (2) and remove release lever (3).

Release screw (1).

Unclip clips (2) with special tool 00 9 317  .

Remove trim panel (3) towards inside.

Installation note: 

Clips (1) on trim panel (2) must not be damaged.