51 12 210 Removing and installing trim on rear left or right bumper side section

Unfasten screws (2 and 3).

Release expansion rivet (4).

Installation:

If necessary, replace expander rivet (4).

Fig 1: Identifying Expander Rivet And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Break open welded clips (1).

Installation:

Secure broken open clips with retainers.

Fig 2: Locating Welded Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully detach trim (1) from catches (2).

Installation:

Catches on trim and bumper side section must not be damaged.

Fig 3: Identifying Trim And Catches

Courtesy of BMW OF NORTH AMERICA, INC.