51 11 160 Removing and installing front underride protection

Special tools required:

NOTE: Pictures created using the X6 3.0 i US as an example. There may be differences in detail in the case of other models.

Release screws (1).

Unclip catches (2) with special tool 00 9 317 and remove underride protection (3).

Fig 1: Identifying Catches, Screws And Underride Protection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on underride protection (2) must not be damaged.

Fig 2: Identifying Catches And Underride Protection

Courtesy of BMW OF NORTH AMERICA, INC.