52 26 405 Replacing cover for left or right rear seat
Special tools required:
- 52 0 050 , see 52 0 050 PLIERS .
Necessary preliminary tasks:
- Remove rear seat , see 52 26 000 Removing and installing/replacing left or right rear seat .
Open tension cable (1).
Disconnect retainers in marked area
Disconnect retainers in marked area
Remove all remnants of clips from cover and support.
Installation:
Insert new retainer (2) with special tool 52 0 050 and bend closed.
- Padding
- Retainer
- Trim wire in padding
- Trim wire in seat cover
- Seat cover