52 13 040 Removing and installing/replacing outer cover on left or right front seat (normal/semi-electric)

Pull lever forward to remove:

• If necessary, lever out lower locking point (1) from rear with a screwdriver.

Release screw (2).

If necessary, move seat fully forwards and upwards.

Remove trim:

1. Unclip at top edge
2. Unclip at rear towards top side
3. Pull on belt opening
4. Unlock lugs
5. Carefully remove trim towards front

Unfasten plug connection.

Replacement only: 

Remove switch  , see 61 31 203 REPLACING SWITCH COMBINATION FOR SEAT ADJUSTMENT .

Installation: 

Retaining clips and tabs must not be damaged.