63 11 800 Replacing left LED main light module left

NOTE: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) ).

Necessary preliminary tasks:

Release screws (1). Tightening torque 1.6 Nm. Remove LED main light module (2).

Fig 1: Identifying LED Main Light Module And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: Gasket (1) for LED main light module (2) must not be damaged and must be installed free from grease.

Make sure LED main light module (2) is correctly installed.

Fig 2: Gasket For LED Main Light Module

Courtesy of BMW OF NORTH AMERICA, INC.