63 14 120 Removing and installing/replacing rear reflector (rear fog light)

Necessary preliminary tasks: 

• Remove rear bumper trim  , see 51 12 157 REPLACING REAR BUMPER TRIM .

If necessary, disconnect plug connection for rear fog light.

Release screws (1). Tightening torque 63 14 1AZ  , see 63 14 CLEARANCE AND SIDE LIGHTS .

Feed reflector (2) in direction of arrow out of bumper trim (3).

Installation: 

Make sure guides (5) of reflector (2) are correctly seated in associated mountings (4) of bumper trim (3).

Fig 1: Identifying Guides, Reflector And Bumper Trim

Courtesy of BMW OF NORTH AMERICA, INC.