52 26 412 Replacing backrest cover for right rear seat
Special tools required:
- 52 0 050 , see 52 0 050 PLIERS .
Necessary preliminary tasks:
- Remove right backrest cover , see 52 13 405 Replacing backrest cover for left or right front seat (normal/semi-electric) .
- Remove backrest actuator trim and lock trim , see 52 26 311 Removing and installing/replacing lock for left or right rear seat backrest .
- Only on vehicles with 5 seats: Remove head restraint.
Lever out welt in marked area.
Detaching cover and padding:
- Release all retainers in marked area
- Remove cover from padding
- Remove remaining retainers from cover and padding
Replacement only:
- Pull all trim wires out of cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets
Installation:
Insert new retainer (2) with special tool 52 0 050 and bend closed.
- Padding
- Retainer
- Trim wire in padding
- Trim wire in seat cover
- Backrest cover