Replacing seat cover

Version with OC3 mat: 

• OC3 mat must not be kinked under any circumstances.

Detach all retainers in side area from longitudinal wires (1).

Pull trim wires (1) forward out of seat cover.

Carefully fold back seat cover and release retainers from cross-wires (2).

Remove seat cover from padding.

Installation: 

Bend new retainer (2) closed with pliers 52 0 050  .

1. Padding
2. Clips
3. Trim wire in seat cover
4. Trim wire in padding
5. Seat cover

Remove trim threads (1) from seat cover (2).

1. (3) If necessary, cable for seat heating

Installation: 

Slide trim threads (1) into new seat cover (2). If necessary, cut mounting for trim threads.