LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> X6 50i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seats - Repair >> Front Seat, Comfort >> 52 17 028 Removing and installing/replacing pump for pressure distributor

52 17 028 Removing and installing/replacing pump for pressure distributor

Necessary preliminary tasks: 

Fig 1: Lifting Out Pump For Pressure Distributor
G06213179Courtesy of BMW OF NORTH AMERICA, INC.

Unlock quick-connect coupling (1) and disconnect.

Unfasten plug connection (2) and disconnect.

Cut open cable tie (3).

Installation: 

Replace faulty cable ties.

Unlock quick-connect coupling (4) and disconnect.

Lift out pump for pressure distributor.

NOTE: Check function.